PRODUCTS
PRODUCT FAMILIES
Position sensing and overtravel protection for machinery that moves. Seven series, from compact vertical types to IP67 waterproof builds.
Positive-break mechanisms for door interlocks, guard monitoring, and emergency stop circuits. Built to meet regional safety codes.
Compact sensing for applications where space is tight and precision matters. From basic snap-action to sealed designs for harsh conditions.
Toggle, foot, and power push button switches for control panels, operator stations, and specialty applications.
not sure where to start?
QUESTION 1
QUESTION 2
Indoor, dry, and clean suits a standard switch. Outdoor, wet, or dusty calls for waterproof or metal housing. Washdown areas need IP67 or higher.
QUESTION 3
If failure means damaged equipment or injured people, choose a safety-rated switch with positive-break operation and full certification documentation.
WHY OUR SWITCHES
30+
YEARS MAKING
10
PRODUCTION LINES
5
ACTIVE CERTIFICATIONS
50
COUNTRIES SUPPLIED
MATERIALS & ENGINEERING
Every TMAZTZ switch uses a copper base with a thick silver overlay at the contact point. Copper carries current efficiently. Silver resists arcing at the surface. For low-current products, gold plating keeps the signal stable across millions of cycles. These material choices add cost per contact. They also add years of reliable service.
Contact points are pressed into position with a precision riveting press. Each one sits centered. Each one performs the same. This requires a specialized machine and high-copper rivet material. A screw and a screwdriver, the common alternative, leave contact alignment to the worker's hand.
ADC12 aluminum for metal housings. Custom NBR rubber for cable glands. Copper-alloy nickel-plated handles for toggle switches. Each material costs more than the industry default. Each one is chosen because it lasts longer in the field. A switch that fails early costs more than any material upgrade.
The TZ-8 cable gland uses a custom rubber compound that flexes under tight bends. WL switches seal the internal mechanism with a full rubber cap. Toggle switches use copper-alloy handles that stay corrosion-free for years. The specifics live in each category page.
If your application requires a specific actuator head, contact configuration, cable length, or operating force that is not listed in our standard range, we can build it. Send us your specification and we will respond with a feasibility assessment within 48 hours.
Tell us about your application. Our engineering team will recommend the right model, or confirm that a custom build is the better path. Same-day response for urgent inquiries.
